Digital thermostat with probe for temperature control, suitable for managing heating or cooling devices through controlled power supply. Designed for applications such as greenhouses, growrooms, and other environments where a set temperature must be maintained in a simple and immediate way.
Key features
- Device type: Thermostat digitale with probe
- Function: Control in heating or cooling mode
- Management load: usable with devices connected to the power supply, within the maximum limit indicated by the manufacturer
- Adjustment: temperature target setting via buttons
- Display: temperature and operating-status display
Overview
What it is for
It is used to maintain a set temperature by controlling the switching on and off of a connected device (for example a heater or cooler), according to the probe reading. It can also be used in non-grow contexts, such as temperature control in terrariums or aquariums, according to the manufacturer’s indications.
Who it is for
- Growers who want to automate the thermal control of an environment
- Setups requiring management in both heating and cooling
- Users who prefer a plug-in solution ready to use
What makes it different
- Supports selectable heat/cool mode
- Setting of the temperature with step of 1 °C / 1 °F
- Very wide setting range (as per the manual)
How to use
Installation
- Connect the device of riscaldamento or cooling to the intake of the thermostat.
- Connect the thermostat to the rete electrical as indicated by the manufacturer.
- Position the probe in the point more representative for the size of the temperature, avoiding correnti air, irraggiamento direct and sources of heat/freddo.
Adjustment
- Set the temperature desiderata through the pulsanti dedicated (step 1 °C / 1 °F).
- Select the mode of operation (riscaldamento or cooling) according to the instructions of the manual.
- If necessary, select unit of size (°C/°F) from the menu of the device.
Maintenance
- Before of the cleaning disconnect the device from the intake.
- Clean involucro with a dry cloth or slightly umido, without immergere the device in water.
- Check periodically integrity of cavo, spina and probe.
Warnings
- Use only with alimentazione indicated by the manufacturer.
- Not use in environments where the device can bagnarsi or cadere in water.
- Not superare the power maximum ammessa by the manufacturer for the load connected.
Technical specifications
- Power supply: 230 V – 50/60 Hz
- Power maximum device connected: 3000 W
- Step of adjustment: 1 °C / 1 °F
- Range setting: from -50 °C a +99 °C (or -58 °F a +210 °F)
FAQ & usage tips
Can THE use it for riscaldamento and cooling?
Yes, the device allows the selezione of the mode caldo/freddo according to the instructions of the manufacturer.
Where best posizionare the probe?
In a point representative of the temperature environment, a medium height and away from correnti air, sole direct and sources of heat/freddo, as indicated in the manual.
That type of apparecchi can THE connect?
Apparecchi collegabili a intake (ad example riscaldatori or raffrescatori) purché within the power maximum ammessa by the manufacturer.