Inline axial fan designed for air intake or extraction through round ducts. The forma cilindrica allows installation direct in the tube or in the passaggi predisposti, risultando suitable for small systems of ventilation in indoor environments and growbox.
Key features
- Device type: Inline axial fan
- Duct diameter: Ø125 mm
- Application: air intake or extraction through round ducts
- Installation: Installation in line on ducting
- Typical use: air exchange in small environments and indoor setup
Overview
What it is for
helps to manage the air exchange in environments chiusi, favorendo removal of the air esausta and inlet of fresh replacement air when integrated in a system of ducting. It is designed for applications of ventilation domestica and, in context indoor growing, to support the control of the microclimate in the growboxes and growrooms compact.
Who it is for
- Growers indoor that want a ventilation ducted simple
- Growbox and small technical rooms where is used intake or extraction in duct
- Setup in which yes privilegia a installation linear and compact
What makes it different
- Format in line, suitable to the installation direct on round ducts
- Solution practical for systems essential of air exchange
- Usable both in extraction both in intake, in basis to the direction of installation
How to use
Installation
- Check the compatibility of the duct with the diameter Ø125 mm.
- Install the unit inline in the duct run, observing the airflow direction indicated by the manufacturer.
- Secure the fan firmly (for example with suitable clamps or brackets), avoiding strain on the cables.
- Connect the power supply in accordance with regulations and the manual instructions.
Tip: in a growbox, extraction yes position typically in the part alta; intake activate, if prevista, in the part low.
Adjustment
- On/off management via timer or external controller, if provided for by your system.
- For any airflow regulation, follow the manufacturer's instructions and verify control compatibility with the model in use.
Maintenance
- Clean the grilles and fan periodically to remove dust and residues.
- Check that the ducts are not crushed or obstructed.
- Periodically check the electrical connections according to the manual.
Warnings
- Do not obstruct the air inlet or outlet.
- Install in conditions environmental compatible with how much indicated by the manufacturer.
- Follow the instructions of the manual for connections electrical and safety.
Technical specifications
- Type: Inline axial fan
- Series/model: VKO1 (variant Ø125)
- Duct diameter: 125 mm
- Electrical and protection data: available in the attached documents
- Performance (airflow/noise/power consumption): available in the attached documents
Brand
VENTS offers solutions for the ventilation ducted. The line VKO/VKO1 It is designed for applications on round ducts, with inline installation and use in intake or extraction a second of the configuration of the system.
FAQ & usage tips
That differenza c’It is between intake ed extraction?
In extraction yes rimuove warm air/esausta from the environment; in intake yes introduce fresh replacement air. The scelta depends from the layout of the growbox and from the strategia of management of the microclimate.
Can I automate ventilation?
Yes: these are typically used with timers or external control systems, following the manufacturer's guidance for the specific model.
How often should it be cleaned?
Depends from the quantità of dust and from the load of lavoro. A cleaning periodic of grilles and fan helps to maintain the correct passage air.