Inline axial fan designed for air intake or extraction through round ducts. Inline installation, directly in the duct, makes it a practical solution for small air-exchange systems in indoor environments and growboxes.
Key features
- Device type: Inline axial fan
- Duct diameter: Ø100 mm
- Application: air intake or extraction through round ducts
- Installation: Installation in line on ducting
- Typical use: Support for air exchange in small environments
Overview
What it is for
It supports air exchange when installed in ducting: it can be configured to extract air from the environment or introduce fresh replacement air, depending on the installation direction and the system design.
Who it is for
- Indoor growers with Ø100 mm ducting
- Growboxes and small rooms requiring intake or extraction through ducts
- Basic setups that require a compact inline component
What makes it different
- Inline format suitable for Ø100 mm round ducts
- Simple installation on ducting
- Flexible use for intake or extraction
How to use
Installation
- Check duct compatibility with Ø100 mm diameter.
- Install the unit inline in the duct run, observing the airflow direction indicated by the manufacturer.
- Secure the fan firmly (for example with suitable clamps or brackets), avoiding strain on the cables.
- Connect the power supply in accordance with regulations and the manual instructions.
Tip: place extraction where warm/humid air tends to accumulate and design an air path consistent with the growbox air inlets.
Adjustment
- On/off management via timer or external controller, if provided for by your system.
- For any airflow regulation, follow the manufacturer's instructions and verify control compatibility with the model in use.
Maintenance
- Clean the grilles and fan periodically to remove dust and residues.
- Check that the ducts are not crushed or obstructed.
- Periodically check the electrical connections according to the manual.
Warnings
- Do not obstruct the air inlet or outlet.
- Install in conditions environmental compatible with how much indicated by the manufacturer.
- Follow the instructions of the manual for connections electrical and safety.
Technical specifications
- Type: Inline axial fan
- Series/model: VKO1 Turbo (Ø100 variant)
- Duct diameter: 100 mm
- Electrical and protection data: available in the attached documents
- Performance (airflow/noise/power consumption): available in the attached documents
Brand
VENTS offers solutions for the ventilation ducted. The line VKO/VKO1 It is designed for applications on round ducts, with inline installation and use in intake or extraction a second of the configuration of the system.
FAQ & usage tips
When is it better to use Ø100 mm instead of Ø125 mm?
It depends on the diameter of the ducting already present and on the system configuration. It is good practice to avoid unnecessary adapters and reduce restrictions in the ducts.
Can I automate ventilation?
Yes: these are typically used with timers or external control systems, following the manufacturer's guidance for the specific model.
Does it require frequent maintenance?
The need depends on the environment. In dusty conditions, periodic cleaning of grilles and fan helps maintain correct airflow.